FREQUENTLY ASKED QUESTIONS

metal furniture — Frequently asked questions

Page 13/31

Will a brass metal frame coffee table scratch my vinyl plank floor in Bedok?

A brass metal frame coffee table will not scratch vinyl plank flooring in Bedok if you fit felt pads under each leg and lift - never drag - the piece. MIDHILL ships rubber-faced glides on metal feet that protect 5-8 mm vinyl. Sweep grit weekly, since trapped grit is what scratches, not the metal itself. Surface warranty is 2 years and structural 10 years, so any finish lift under a leg will be refinished free at the Lacong Foshan facility.

How heavy is a 6-seater metal dining set in kg, and will my Jurong lift take it?

A 6-seater metal dining set with stone top weighs 90-140 kg packed, while an all-metal set weighs 45-65 kg. Jurong HDB service lifts handle 250-300 kg and measure about 1.2 m deep by 2.0 m high. MIDHILL splits heavy crates into two boxes under 70 kg each so two delivery men can carry them upstairs. Stone tops travel on edge in padded slots. Confirm your unit floor before ordering; free shipping applies above US$350 including Singapore GST.

What cushion colour works with a slim brass metal frame chair in a Tampines HDB?

For a slim brass metal frame chair in a Tampines HDB, choose cushions in cream linen, dusty olive, soft terracotta or muted clay rather than competing metallics. A 45 cm square with down-feather core keeps the seat comfortable and the brass profile clean. Add one 30x50 cm lumbar cushion in oat boucle. MIDHILL's brushed brass finish is a polyester over brass plate, so cushion dyes will not bleed onto the metal.

Will a black metal TV console rust in a Bendok HDB with no windows?

A black metal TV console will not rust in a windowless Bedok HDB media wall if humidity stays below 70 percent RH, which a working aircon usually achieves. MIDHILL finishes TV consoles in polyester powder coat over cross-linked polyurethane, backed by a 2-year surface warranty. Avoid silicone polishes and standing water near cable holes. Wipe monthly with the pH-neutral cleaner that ships in the crate; refinishing is offered for the piece's lifetime.

Common pairing mistakes when styling a brass metal frame in a Scandinavian HDB?

Common Scandinavian HDB styling mistakes with brass metal frames include matching warm brass with cool chrome lamps, layering too many metallics, and placing the metal under direct ceiling-fan airflow that catches dust. Pick one metal tone - MIDHILL's brushed brass reads warmer than warm oak floors. Pair with a 200x280 cm wool rug in stone, ivory linen curtains and one black accent. Keep cushions to two textures, and avoid silicone polishes that yellow the brass.

Will a slim metal side table damage the aircon compressor outside a Punggol HDB?

A slim metal side table placed near a Punggol HDB aircon compressor will not damage the unit, but constant water spray will pit the steel within 12-18 months. MIDHILL's cross-linked polyurethane finish resists this if you wipe the legs monthly and apply the touch-up pen supplied. Keep the table at least 30 cm from the drip line. Surface warranty is 2 years, refinishing is lifetime. Never use silicone polish near outdoor compressor units.

How do I clean a black metal dining set in a Singapore HDB without ruining the finish?

Clean a black metal dining set in a Singapore HDB using the pH-neutral solution and microfibre cloth from the crate, not supermarket polishes. Wipe spills within 10 minutes, dry edges around rubber feet, and avoid silicone, ammonia or bleach products. MIDHILL's 2-year surface warranty is voided by abrasive or high-pH cleaners and standing water. Annual touch-up with the supplied pen keeps the cross-linked polyurethane seal intact for 10+ years.

What curtain length suits a 90 cm tall metal console in a Bedok condo?

A 90 cm tall metal console in a Bedok condo suits curtains that just kiss the floor at 230-275 cm drop, hung 5 cm below the rod so the brass frame can show. Pick ivory linen or sheer oat rather than heavy velvet. MIDHILL's 90 cm brass consoles leave 120-130 cm of wall above for art or a mirror. Keep the curtain rod 15 cm wider than the console for balanced proportions and better airflow.

Will an industrial metal coffee table clash with a Japandi bedroom in Tampines?

An industrial metal coffee table can work in a Japandi bedroom in Tampines if you soften it with a 160x230 cm wool rug in oatmeal, linen curtains, and one ceramic vase with pampas. MIDHILL's industrial pieces in matte black or pewter powder coat pair better with warm wood tones than with cold concrete. Avoid matching metal bedside lamps; pick one warm rattan lamp instead. Keep styling to three textures for a calm Japandi feel.

What should I buy first when furnishing a Bedok HDB living room with metal furniture?

Buy the largest metal piece first - usually a 6-seater dining set or 200 cm media console - so the room's scale is locked in. In a 4-room Bedok HDB, a dining set with a 180-200 cm table in cross-linked polyurethane fits a 1.4 m wide service lift. MIDHILL's Lacong Foshan facility builds to a 5-day specification if you bring measurements. Add a 200x280 cm rug, one floor lamp, then cushions last. Skip silicone polishes at any stage.

How do I choose metal furniture for a small HDB flat in Singapore?

Measure your room first — note corridor width (usually 1.1–1.2m), lift opening (around 0.9m wide, 2.1m deep on most HDB blocks), and doorways before anything else. Pick metal furniture under 40cm deep for tight 3-room layouts in Bedok or Toa Payoh so it doesn't block walkway air flow. Prioritise powder-coated frames over raw steel to fight our 80–90% humidity, and choose slim legs so the floor stays visible — the room reads bigger. Mirror or glass tops on a metal base also bounce light around windowless study corners without adding visual weight.

Will powder-coated metal furniture rust in a non-aircon Jurong storage room?

In an enclosed Jurong storeroom without air-con, humidity regularly sits at 80–85% — powder coating alone will fail within 12–18 months on cheaper imports. Ask the seller whether the steel is cold-rolled or galvanised before powder coat, and whether edges are sealed. Wipe any condensation weekly and never store wet items against the frame. A silica gel canister placed inside the storeroom slows the corrosion cycle and costs under S$8 at any NTUC FairPrice.

What metal furniture colour works best for a Scandinavian sintered stone metal furniture look?

For a Scandinavian sintered stone metal furniture aesthetic, stick to matte white, light grey, or warm sand powder-coated frames paired with a sintered stone top in Calacatta or pale grey veining. Avoid high-gloss black — it fights the soft, natural feel Scandinavian style is built on. In a bright Tampines or Punggol BTO with good window light, this combination reads airy rather than clinical, and the sintered stone resists curry and coffee stains far better than laminate.

How wide can metal furniture be to fit through a HDB lift in Singapore?

Most HDB passenger lifts offer a clear opening of about 0.9m wide and 2.1m deep, though newer blocks in Punggol and Sengkang run slightly larger. Any metal furniture wider than 85cm at its longest dimension usually needs to be tilted upright, and items over 2m tall may not clear the ceiling hatch on older lifts. Always confirm crate dimensions before ordering — a S$80–150 door-to-lift trolley move becomes a S$400 craning job if it doesn't fit.

Does cream rubberwood metal furniture yellow in Singapore sunlight?

Cream rubberwood metal furniture can yellow within 8–12 months if placed within 1.5m of an unshaded west-facing window, since Singapore UV index regularly hits 11+. The metal frame itself stays stable, but the rubberwood grain fades unevenly. Rotate the piece quarterly, draw sheer curtains during peak 1–3pm sun, and apply a UV-resistant wax twice a year. Position it against a north or east wall in your Bedok or Hougang flat for the most consistent colour over time.

What paint colour pairs best with black metal furniture in a small condo?

For black metal furniture in a compact condo, warm whites like Dulux Pure Brilliant White or Dulux Natural White soften the contrast instead of fighting it. Cool greys (Dulux Misty Morn) suit modern Malaysian condo styling but can feel sterile in a windowless kitchen. Avoid matching grey walls — the metal frame disappears and the room looks flat. One accent wall in sage green or terracotta adds depth without overwhelming the 50–60 sqm typical Singapore condo living area.

How heavy is a standard metal dining table for a 4-person HDB kitchen?

A standard 4-seater metal dining table for HDB kitchens weighs between 18–28kg depending on frame gauge and top material. A sintered stone top adds another 12–15kg on top of the base. Before buying, measure your kitchen corridor and lift — anything above 35kg total should be carried by two movers because tilting on stair landings risks both injury and wall scuffing. Most Tampines and Jurong delivery teams charge S$40–60 per floor without lift access.

What rug size works with a metal coffee table in a Singapore condo living room?

For a metal coffee table in a typical 4m x 3m condo living room, pick a rug at least 200cm x 280cm so the front legs of your sofa sit on it too. Anything smaller makes the metal frame float awkwardly and shrinks the visual space. Low-pile polypropylene or cotton rugs handle Singapore humidity better than thick wool — they dry faster after afternoon thunderstorms and don't trap the musty smell Jurong and Bukit Batok residents often complain about.

Can I leave metal furniture on a balcony during the monsoon season?

Outdoor-rated metal furniture with proper galvanising and powder coat can handle Singapore monsoon season, but most indoor metal pieces will pit within one rainy season on an uncovered balcony. The combination of 90% humidity, direct rain, and UV breaks down standard finishes fast. If you must, cover it nightly with a breathable polyester cover (S$15–25 at IKEA Alexandra) and wipe down weekly. A small roof overhang of at least 60cm dramatically extends the lifespan.

How do I clean white metal furniture without damaging the finish?

Clean white metal furniture with a damp microfibre cloth and a drop of pH-neutral dish soap, then dry immediately — standing water leaves calcium marks on white powder coat within hours. Never use Magic Eraser, bleach, or cream cleansers; they strip the lacquer and void the 2-year surface warranty on most pieces. For oily fingerprints around kitchen metal stools, a 1:1 white vinegar and water spray works well. Avoid silicone polishes — they attract dust in our humid air.

What cushion colour looks best with a sage green metal frame chair?

Earthy tones pair best with a sage green metal frame chair — think terracotta, rust orange, mustard yellow, or warm beige cushions in linen or cotton. Cool blues and greys clash with the green undertone. For a Korean minimal look, stick to off-white or oatmeal with a single textured cushion. Avoid matching sage-green cushions — the chair and cushion blend into one flat shape. Local stores like HOUZE and Castlery carry compatible 45cm x 45cm inserts around S$25–45 each.

What floor lamp height works next to a metal side table?

A floor lamp 150–165cm tall works next to a standard 55–60cm metal side table, putting the bulb shade roughly at seated eye level when you're on the sofa. Slim arched styles in matte black or brass pair cleanly with metal frames without competing visually. Avoid tall torchiere lamps over 180cm beside a 50cm side table — the proportion breaks and the corner looks top-heavy. IKEA's ÂMOT and Castlery's Otis both fit this height range comfortably for Singapore ceiling heights of 2.6–2.8m.

How do I stop metal furniture from wobbling on uneven HDB floors?

HDB floors in older blocks like those in Queenstown or Tiong Bahru can sit 8–12mm out of level across a single room, which makes metal furniture wobble badly because rigid frames don't flex like wood. Buy adjustable levelling feet (S$6–12 a set at Seletar Hardware) and screw them into the pre-tapped inserts most quality metal bases include. Felt furniture gliders alone won't fix it. For severe slopes, shim the low leg with a thin rubber wedge rather than over-tightening the adjuster.

Is oak teak metal furniture suitable for a Korean minimal condo?

Yes, oak teak metal furniture suits a Korean minimal condo really well — the warm wood grain softens the industrial metal edge and the combination feels intentional rather than cold. Stick to light oak over dark teak for the airy Korean aesthetic, and pair with a slim matte black or warm white metal frame. Avoid ornate carved edges; clean square joinery reads more Seoul café than traditional teak furniture. The wood-and-metal mix also handles Singapore humidity better than solid wood alone.

What's the first piece of metal furniture I should buy when furnishing a new BTO?

Buy a metal dining table first when furnishing a new BTO — it anchors the open-plan living area and you use it daily, so you'll quickly notice if the proportions work. Pick something extendable if your unit is under 90 sqm, common in Punggol and Sengkang BTOs. A 120cm–140cm table seats 4–6 and leaves walking room. Skip matching metal chairs initially — buy them later once you've lived with the table and know your traffic flow around it for a few weeks.

Do metal furniture legs damage aircon condensate piping in false ceilings?

No — aircon condensate piping sits inside the false ceiling above, not on the floor, so metal furniture legs pose no direct risk to it. The real concern is the trunking that runs along the ceiling-wall corner. When moving tall metal shelving, don't tilt it against the wall because the top edge can crack the trunking cover and cause leaks during heavy rain. Keep metal furniture at least 5cm away from any visible PVC trunking around your HDB or condo perimeter.

What curtain fabric pairs well with industrial metal furniture?

Natural linen or linen-look polyester curtains pair best with industrial metal furniture — the soft texture balances the hard metal edges and light filters warmly during Singapore's harsh afternoon sun. Stick to oatmeal, stone grey, or pale terracotta; avoid heavy velvet which fights the industrial aesthetic and traps heat. Sheer white curtains behind linen panels give you privacy at night without darkening the room. Most curtain shops in Tai Seng or Tan Boon Liat charge S$45–80 per metre made.

What's a common styling mistake Singaporeans make with metal furniture?

The biggest mistake is mixing too many metal finishes in one room — brass handles, black frames, chrome legs, and copper accents all in the same 40 sqm condo living area. Pick one dominant metal finish and repeat it at least twice in the room for cohesion. Another common slip: placing slim metal furniture against a busy patterned feature wall where the frame visually disappears. A plain white or warm-grey wall lets the metal silhouette read cleanly and makes a small space feel intentional.

How do I check metal furniture quality before buying in Singapore?

Check three things before buying metal furniture in Singapore: weld consistency at the joints (smooth, no gaps), powder-coat thickness (should feel slightly textured, not glass-smooth which indicates thin spraying), and frame weight relative to size. Lift the piece — a hollow-sounding 1.2m console under 12kg is almost certainly thin-walled. Ask for the steel grade and whether galvanising was done before powder coat. MIDHILL provides dated batch inspection records and photos for every metal furniture order on request, which is rare in this category.

What is the difference between American loveseat and modern furniture styles in metal?

An American metal loveseat is wider (around 150–170 cm seat width), deeper cushions, and uses thicker 50×50 mm box-section frames meant for spacious condos. Modern metal furniture runs narrower at 120–140 cm with slimmer 25–40 mm tubing to suit compact HDB living rooms in Bedok or Jurong. Americans favour distressed bronze; modern favours matte black or sand-grey. For a 90 sqm condo, modern fits circulation paths; American needs at least 2.6 m wall length to breathe properly.

Where can I buy American metal furniture that ships to Singapore?

American metal furniture typically ships through Foshan factories that licence US designs. MIDHILL exports to 15+ countries from its own workshop since 2008, with free shipping over US$350 and a 14-day return window. Lead time to a Singapore HDB in Tampines is about 35–45 days sea freight, plus GST 9% on landed cost. A queen-sized metal bed frame around 30 kg ships in a moisture-controlled crate with desiccant — important for tropical humidity. Request batch inspection records before paying balance.

Is French metal furniture sold in Saudi Arabia the same quality as what's shipped to Singapore?

French metal furniture shipped to Saudi Arabia and Singapore usually comes from the same Foshan production line — quality is identical, but the finishing differs. Middle-East orders often use polyester powder coat for heat resistance (45 °C+), while Singapore-bound pieces use nitrocellulose lacquer that suits indoor air-conditioned homes. MIDHILL’s high-touch horizontal surfaces may run a different system from vertical pieces, a sequence worth asking about. Both regions get the 10-year structural warranty, but GST 9% applies only in Singapore.

Can modern rattan metal furniture handle Singapore's humidity without going mouldy?

Modern rattan metal furniture pairs PE rattan weave with powder-coated aluminium or steel frames — aluminium is safest for non-aircon balconies in Punggol or Jurong. Steel frames must be cross-linked polyurethane coated, not standard polyester, to survive 80–90% RH. Expect 3–5 years before PE rattan fades; the metal frame should last 10+ years with a quick monthly wipe. Keep rattan off grass surfaces and lift it 5 cm for airflow. Avoid leaving standing water along the weave edges — that's the usual warranty-voiding cause.

Will a 1.6 m metal dining table fit through my Tampines HDB lift?

Standard HDB passenger lifts measure roughly 1.5 m deep × 1.1 m wide with a 2.1 m door height. A 1.6 m metal dining table will not enter upright — request the supplier split the top from the base. MIDHILL crates its tops vertically in padded slots with the polished face never touching, base rigidly framed. Allow 35–45 days sea freight plus GST 9% landed. Measure your corridor turn (typical 1.2 m) before ordering; many Tampines 4-room corridors add another 0.3 m elbow to navigate.

How much weight can a powder-coated metal coffee table hold in a HDB home?

A 90×60 cm powder-coated steel coffee table with a 25×25 mm tube frame typically holds 80–120 kg distributed — enough for 6 guests leaning on it or stacked books. MIDHILL’s cross-linked polyurethane finish resists ring marks better than standard polyester. In a non-aircon Bedok store room, wipe monthly with pH-neutral cleaner — never silicone polish. A small Americano coffee spill left overnight will pit the lacquer. Add felt pads under any ceramic vase over 5 kg to prevent point loads at corners.

What metal furniture finish lasts longest in Singapore's humidity?

Cross-linked polyurethane powder coat over hot-dip galvanised steel outlasts nitrocellulose lacquer by 5–8 years in non-aircon conditions. For a Jurong balcony or Punggol patio, request the marine-grade specification — it adds about 12% to cost but prevents the brown bleed-through you see on cheaper pieces. Indoor pieces in air-conditioned Tampines condos can use standard polyester. MIDHILL ships a written cleaning instruction with each order; warranty claims trace back 80% of the time to wrong cleaner use.

Is black or brass metal furniture easier to maintain in a small condo?

Black powder-coated metal furniture hides fingerprints, dust and minor scratches better than brass — a real plus in a compact 90 sqm Punggol condo. Brass needs monthly polishing with a non-abrasive cloth, otherwise it oxidises within 4–6 months near the kitchen. For low-effort upkeep, choose matte black frames with cross-linked polyurethane coating. Reserve brass for air-conditioned display zones only. Both finishes are available from MIDHILL; ask for batch records dated within 30 days of shipment.

How do I style a black metal coffee table in a Scandinavian condo?

Pair a 110×60 cm matte-black metal coffee table with an off-white wool rug (160×230 cm), a warm oak tray, and a single ceramic vase in bone or sand. Scandinavian style relies on negative space — keep only 3 items on the surface: a book stack, a candle, a plant. In a Bedok 5-room flat, place the table 40 cm from the sofa, not centred. Avoid brass lamps or coloured cushions; they fight the calm palette. Add one E27 linen-shade floor lamp at 150 cm height behind the sofa.

What paint colour goes with a brass metal side table in a Korean minimal room?

Korean minimalism pairs brass metal furniture with warm whites (Dulux 30YY 83/026 or Nippon B99-1), soft greige, or muted clay. Avoid cool greys — they make brass look green. In a Jurong East condo, paint one feature wall in clay tone (Nippon 30YR 19/191) behind the side table, keep other walls at 70% white. Place a single dried pampas stem in a stoneware vase, no other styling. The brass becomes the only warm focal point. Budget S$120–S$180 for 5 L of feature-wall paint.

Should I choose Japandi or modern Malaysian condo style for my metal bed frame?

Japandi suits slim 25×40 mm black metal bed frames with white linen bedding — clean, low (28 cm platform height), minimal headboard. Modern Malaysian condo style uses chunkier 40×40 mm frames in matte bronze or sage green with rattan side tables. For a Tampines 5-room HDB at 110 sqm, Japandi reads calmer; Malaysian modern feels warmer and more tropical. Buy the bed frame first, then layer the room around its finish — not the other way around. Both work; pick Japandi for resale-friendly neutrality.

What rug size pairs correctly with a 140 cm metal bench in my entry?

A 140 cm metal entry bench needs a 200×80 cm runner rug, not a square — runners match the linear flow. Choose a low-pile wool or flatweave cotton so the bench legs sit flat. In a Punggol condo with a 1.4 m entry wall, centre the bench 50 cm from the door, rug tucked 5 cm under each end. Avoid plush shag — it catches the metal frame and shows footprints. A muted jute rug (S$120–S$220) survives Singapore humidity better than cotton blends that mildew at the edges.

What cushion colours clash with brass metal furniture in a tropical home?

Avoid cool turquoise, electric blue and lavender — they clash with brass’s warm undertone and read cheap under warm-white LEDs. Stick to earthy ochre, sage green, terracotta, ivory or muted clay. For a Bedok condo living room with brass side tables, choose 2 ochre + 1 sage cushion combo on a neutral sofa. Tropical greenery (monstera, areca palm) softens brass beautifully. Avoid pairing brass with rose gold accessories — mixing yellow metals looks accidental. Limit metal finishes in one room to two tones max.

What curtain fabric works best in a room with lots of black metal furniture?

Sheer linen curtains in ivory or oat balance black metal furniture — they soften the visual weight without competing. Avoid heavy velvet or dark colours; they make a Punggol 4-room HDB feel cave-like. For a 2.4 m window height, mount rods 15 cm below ceiling to lengthen the room. Budget S$280–S$450 per panel for custom linen-look polyester. Layer a blackout liner behind for afternoon sleep. Keep the rod in matte black to echo the metal frames — brushed nickel will look mismatched under warm 2700K bulbs.

How do I stop a metal bookshelf from scratching my vinyl plank floor?

Felt pads under every metal leg are non-negotiable on vinyl plank — even powder-coated steel will leave grey scuff marks within weeks. Use 22 mm felt pads (S$8 for a pack of 16 at Daiso), replace yearly. In a Tampines HDB, lift rather than drag the shelf when mopping. Add a 200×40 cm floor protector strip under the front legs if the shelf sits near a walkway. Avoid rubber pads — they trap moisture and leave yellow rings on vinyl. Keep the shelf weight under 60 kg per shelf for safety.

Can I leave a metal console table on my non-aircon Jurong balcony long-term?

Yes, only if the console uses hot-dip galvanised steel with cross-linked polyurethane powder coat — standard polyester will pit within 8–12 months in Jurong’s outdoor humidity. Add a S$40 cover during heavy monsoon weeks (Nov–Jan). A 120×35 cm aluminium-framed metal console with a teak top handles Jurong weather best; pure steel needs indoor shelter. Inspect joints every 6 months for white rust bloom. MIDHILL’s outdoor specification carries the same 10-year structural warranty as indoor pieces when correctly specified.

How do I clean water rings off a metal side table without damaging the finish?

Wipe water rings immediately with a soft microfibre cloth — never let moisture sit overnight on lacquer. For stubborn marks, use a damp cloth with one drop of pH-neutral dish soap, then dry. Avoid abrasive sponges, white vinegar, or silicone polishes; they void the MIDHILL surface warranty within weeks. A written cleaning instruction ships with every order — follow it exactly. For a Bedok home with morning sun hitting the table, rotate the piece monthly so UV fading stays even. Touch-up kits are available for S$25–S$45.

Will a metal console table scratch if I place a ceramic vase on it daily?

A ceramic vase with a rough unglazed base will micro-scratch powder-coated metal within 3–6 months. Stick felt discs (S$6 for 24 pcs) under vase bases, planters and table lamps. For a 120×35 cm metal console in a Tampines entry, limit ceramic pieces under 4 kg point load at one spot. Cross-linked polyurethane finishes resist scratches better than polyester. If you see swirl marks, they may be polished out using the supplier’s progressive abrasive sequence — paste on felt, buff, then remove swirl. Don’t attempt without instructions.

What is the real production lead time for a custom metal console table to Singapore?

Custom metal console tables from Foshan workshops typically need 25–35 days production plus 18–22 days sea freight to Singapore — total 6–8 weeks door-to-door. MIDHILL’s Lecong showroom reaches a specification in 5 working days if you bring a dimension schedule; production starts after a 30% deposit. Add 7–14 days for GST 9% clearance and lift-booking at your HDB. Multi-stage inspection records with batch dates are available on request. Peak season (Sept–Nov) adds 2–3 weeks; order before August for Chinese New Year delivery.

Do metal furniture crates really need desiccant for Singapore delivery?

Yes — sea-freight containers travel through humidity swings from 20% to 95% RH over 25 days. MIDHILL uses low-moisture crate timber plus desiccant matched to cargo volume plus a vapour barrier. Stone or mirror-faced metal pieces travel vertically with polished faces never touching. Skipping desiccant invites mould bloom on lacquer and rust on unfinished edges within 48 hours of container door-opening in Jurong. Inspect crates at your HDB lobby before signing — reject any with condensation streaks or punctured vapour bags.

Are MIDHILL metal furniture pieces sold direct to Singapore homeowners?

MIDHILL is a Foshan solid wood and metal furniture maker established 2008, exporting to 15+ countries with a Lecong showroom by appointment. They sell B2B primarily, but homeowners can request quotes via email for Singapore-bound orders. Free shipping kicks in over US$350; 14-day returns apply for unused pieces. Structural warranty is 10 years, surface 2 years, with lifetime refinishing. Two working days to evaluate your shortlist at Lecong; five days to reach a written specification if you bring dimensions.

Previous 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Next
MIDHILL — solid wood furniture, Foshan China. Shop the collection

Home